Wood is a natural material which contracts or expands depending on the temperature. This puts demands on a floor heating system to distribute the heat in a gentle and controlled way. Usually the wooden floor manufacturers prescribe a max. temperature of 27° which must not be exceeded.
Precise controls
All this calls for a very precise heat control, and that is precisely what DEVI offers:
The devireg™ electronic thermostat with floor sensor ensures that the temperature in the floor construction always is in accordance with the tolerance level that the manufacturer of the floor surface has recommended. The floor will be evenly warm, and never to hot to risk any damages.
Under all types of wooden floors
The DEVI floor heating system can be used anywhere in the house, regardless whether the floor is constructed with floor boards on joists or wood-laminates or massive parquet on concrete supported by joists. Under all circumstances it is important that the floor is well insulated below to ensure the best heating comfort and most economical result.
Product choice
A wooden floor should not be heated with cables with an output of more than 10W/m. We recommend the deviflex™ DTIP-10. The installation must of cause be in accordance with local building regulations, which normally prescribes a maximum output of 80W/m2 under wooden floors.
A floor sensor must always be installed with wooden floor applications and for regulation we recommend devireg™ 550 thermostat (flush mounted). This combination thermostat is equipped with both a built-in room sensor which registers the temperature of the room and a floor sensor, which, when placed under the floor, registers and limits the floor temperature to the maximum of a chosen setting.
| Advantages of Our Product |
|---|
A warm wooden floor |
| A thoroughly tested soloution, approved by leading floor manufacturers |
High standards of comfort |
| A maintainance free heating system |
| A healthy and dry floor construction |
