DEVIMAT DTIF 100 SERIES

WARM FLOORS MADE SIMPLE

Full Range of Products devimat DTIF is a self adhesive mesh, with ultra thin cable pre-attached. It comes in a full range of sizes, from 0.5m-12m and is available in both 100W and 150W per m² for installation onto both concrete and timber floors.

The mat is simply rolled out, cut and turned to fit the available free floor area. A flexible tile adhesive/self levelling compound and the chosen floor covering is then laid. As the cable is a twin conductor, there is no second tail to return to the thermostat, saving on installation time and cost.

The system is best suited to the devireg 550 or 535.

Choosing the right system
In order to obtain a solution to match your requirements, it is important that you choose the correct devimat - both as regards size and wattage. Click the More button below to find out more about choosing the right system.

Installing devimat™
Take a look at our step-by-step guide to the installation of the devimat self-adhesive underfloor heating mat.

Model	Load (Watts)	Wire Thickness	Dimensions	Conductor	Conductor Insulation	Rated Temperature

		devimat™100 DTIF Series devimat 100 Series is ideally suited to timber based floors.
1.0 m²	100 W	3mm	50 cm x 200 cm	Twin	FEP, Teflon	120°C
1.5 m²	150 W	3mm	50 cm x 300 cm	Twin	FEP, Teflon	120°C
2.0 m²	200 W	3mm	50 cm x 400 cm	Twin	FEP, Teflon	120°C
2.5 m²	250 W	3mm	50 cm x 500 cm	Twin	FEP, Teflon	120°C
3.0 m²	300 W	3mm	50 cm x 600 cm	Twin	FEP, Teflon	120°C
3.5 m²	350 W	3mm	50 cm x 1200 cm	Twin	FEP, Teflon	120°C
4.0 m²	400 W	3mm	50 cm x 800 cm	Twin	FEP, Teflon	120°C
5.0 m²	500 W	3mm	50 cm x 1000 cm	Twin	FEP, Teflon	120°C
6.0 m²	600 W	3mm	50 cm x 1200 cm	Twin	FEP, Teflon	120°C
7.0 m²	1200 W	3mm	50 cm x 1400 cm	Twin	FEP, Teflon	120°C
8.0 m²	800 W	3mm	50 cm x 1600 cm	Twin	FEP, Teflon	120°C
9.0 m²	900 W	3mm	50 cm x 1800 cm	Twin	FEP, Teflon	120°C
10.0 m²	1000 W	3mm	50 cm x 2000 cm	Twin	FEP, Teflon	120°C
12.0 m²	1200 W	3mm	50 cm x 2400 cm	Twin	FEP, Teflon	120°C