Technical Specification
| Operation voltage: |
180-250 VAC, 50/60 Hz |
| Standby power consumption: |
Max. 1W |
| Relay: |
|
| - Resistive load: |
230V ~ 15A / 3450W |
| - Inductive load: |
cos φ = 0.3 Max. 4A |
| Sensing values: |
|
| - 0˚C |
42 kOhm |
| - 20˚C |
18 kOhm |
| - 50˚C |
6 kOhm |
| Regulation: |
PWM |
| Ambient temperature:C |
0˚ to +30˚C |
| Sensing unit: |
NTC 15kOhm at 25˚C |
| Sensor failure monitoring: |
The thermostat has a built-in monitoring circuit, which will switch off the heating if the sensor is disconnected or short-circuited |
| Transmission frequency: |
868.42MHz |
| Transmission range: |
in normal buildings up to 30m |
| Transmission power: |
Max. 1 mW |
| IP class: |
31 |
| Dimensions: (L/W/D) |
85x85x21 mm |
DEVILINK™ FT
devilink™ FT is the device that switches the heating element on and off.
It can be connected to an underfloor sensor to give a more precise measurement of the floor temperature.
devilink™ FT is built on the devireg™ 530 series. It has an LED indicator, which indicates whether the relay is on or off.
